Robopac Masterplat FREEZER, Руководство по эксплуатации и обслуживанию

Страница: 113 / 123

113
FAULT INFORMATION ENG
8. FAULT INFORMATION
8.1. ALARM MESSAGES
In the event of a breakdown during operation the machine stops automatically and alarm messages appear on the
display.
The table lists the displayed messages, the type of problem, the causes and possible solutions.
Important
For these operations a precise technical expertise or ability is required; therefore, these operations must
be exclusively performed by qualified personnel with certified experience acquired in the specific field of
intervention.
List of alarms
Code Problem Cause Solution
E01 Emergency mushroom-head
button alarm.
Emergency mushroom-head
button pressed
Reset the button and press the
“Reset” button
E02 Carriage emergency An obstacle has been detected
along the trajectory during the
spool carriage downstroke.
Remove the obstacle and
press the “Reset” button
E03 Hand pallet truck emergency An obstacle has been detected
on the pallet loading/unloading
ramp.
Remove the obstacle and
press the “Reset” button
E04 Protection alarm Intervention of safety barriers or
open door
Remove the obstacle and
press the “Reset” button
E30 Inverter alarm:
1. Table
2. Carriage
3. Stretch
Motor faults Contact technical support
E60 “Film breakage” alarm The film has broken or spool is
finished
Insert the film or replace spool.
E61 Blocked table alarm A fault or an obstacle is
preventing the table from
moving
Solve the fault or remove the
obstacle and press the “Reset”
button
E83 Error alarm
Communication
Electronic fault Contact technical support