Robopac Masterplat FREEZER Скачать руководство пользователя

Страница: 55 / 123

INFORMATION ON HANDLING AND INSTALLATION

ENG

4.5. INSTALLATION OF THE MACHINE

The machine must be installed in an area which fulfils the requirements

indicated in paragraph “Installation

environment characteristics”.

If necessary, identify the exact position by plotting the coordinates for correct positioning.

Danger - warning

Authorised technical service personnel must perform installation and assembly operations.

Proceed as follows:

Insert the forklift truck forks in the specially designed spaces provided in the base.

Lift the machine from the pallet (if any).

Danger - warning

To perform the operation in safety conditions, insert some wooden blocks under the forks of the forklift

truck and place everything on the floor.

Place the machine in the area assigned for assembly.

Important

The resting surface must be smooth and well levelled.

Masterplat PLUS FRD-PGS

Masterplat PLUS TP3 FRD-PGS

Masterplat PLUS LP

Содержание Masterplat FREEZER




























































































































Результаты поиска

Содержание Masterplat FREEZER

Отзывы:

Похожие инструкции для Masterplat FREEZER

Бренды по названию

Популярные бренды

Robopac Masterplat FREEZER, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание Masterplat FREEZER

Отзывы:

Похожие инструкции для Masterplat FREEZER

Бренды по названию

Популярные бренды