Robomow RT300 Скачать руководство пользователя страница 5

Страница: 5 / 67

Always connect the power supply to the indoor, weather-protected

power supply circuit protected by a residual current device (RCD)

with a tripping current of not more than 30 mA. Follow local electric

installation instructions.

Allow the blades to completely stop rotating before lifting or tilting

the mower or approaching the blades.

The AC power supply cord must not be replaced! If the cord is

damaged, the entire power supply should be replaced. Do not

connect a damaged power cord to the supply and do not touch

such cord as it can cause electric shock.
Keep all power cords away from underneath the mower to prevent

damage.

It is your responsibility to:

• Restrict the use of this mower to persons who have read,

understood and follow the warnings and instructions in this

guide and in the mower

• Inform your neighbors you have a robot mower in operation and

that they may be injured if they enter your lawn during operation

Important Safety Information

In case of a lightning storm, disconnect the perimeter wire from

the Base Station and unplug its power supply from the AC socket.

CAUTION

DANGER

WARNING

Содержание RT300




































































Результаты поиска

Содержание RT300

Отзывы:

Похожие инструкции для RT300

Бренды по названию

Популярные бренды

Robomow RT300, Руководство пользователя

Результаты поиска

Содержание RT300

Отзывы:

Похожие инструкции для RT300

Бренды по названию

Популярные бренды