10
11
H. Slope Operation
1. All slopes require extra caution. If you feel the mower cannot maintain
traction on the slope, it is too steep to mow. Wet grass will decrease traction
and may cause the mower to slip and slide on the slope. Serious injury or
property damage could result.
2. For your safety, measure any slope before using the mower on the sloped
area. Use a slope measuring device before setting up the mowing zones or
operating this mower on a sloped or hilly area. Smart phone applications can
also be utilized to measure slopes. If the slope at the perimeter is greater
than 17 degrees (30%), RT models may slide out of the mowing zone.
3. Do not mow on slopes greater than 17 degrees (30%).
4. Do not operate the mower under any conditions where traction or stability
is in question. Always be sure of the mowing surface. A tip or overturn could
cause serious personal injury or property damage.
5. Stay at least 4 feet (1.2 meter) from drop-offs, ditches, embankments or the
edge of water to help ensure the mower does not get out of the mowing zone.
You could damage the mower or cause a serious injury.
I. Maintenance and Special Instructions
1. Keep the mower in good working order. Replace worn, damaged or broken
parts. Manufacturer part numbers of the batteries, blades and power supplies
are specified in the ‘Additional Information’ booklet.
2. To avoid serious injury do not modify the mower in any way.
3. Mower blades are sharp. Wrap the blade or wear gloves and use extra caution
when changing the blade.
4. Always switch off the mower by removing the disabling device before
servicing or clearing blockage of the mowing blade(s) and/or driving wheels
or inspecting. Never attempt to service or adjust the mower while it is in
operation. Before cleaning, repairing or inspecting, make certain the blade
and all moving parts have stopped.
5. The blade should come to a complete stop within two (2) seconds after
pressing the red stop control. If you do not hear the blade stop in less than
two (2) seconds, your mower must be serviced professionally by an authorized
service dealer.
6. Never use a high pressure power washer or hose to clean the mower. Water
can damage components and the programmable controller. Use a damp
cloth to wipe the display clean.
7. Visually inspect blade for damage (e.g., excessive wear, bent, cracked).
Replace the blade with the original equipment manufacturer’s (O.E.M.) blade
only. Non-O.E.M. blades will not fit properly and could potentially be unsafe.
8. Use of service parts which do not meet the original equipment specifications
may lead to improper performance and compromise safety.
9. After striking a foreign object, or getting hung up, stop the mower. Thoroughly
inspect the mower for any damage. Repair the damage before starting and
operating.
Содержание RT300
