35
EN
6.4.1.4 Area
– Update the size of the lawn in case it has been changed.
•
Press the
‘Setting’
button 4 times until the Area icon is blinking.
•
Scroll to change the area and press
‘OK’
to confirm.
•
If more than one zone is defined, then first scroll to select the zone you want to edit and set the area
for that zone as described above.
Names of zones are as follows:
L1
– Main Zone
L2
– Separated Zone A
L3
– Separated Zone B
A1
– Sub-Zone 1
A2
– Sub-Zone 2
A3
– Sub-Zone 3
A4
– Sub-Zone 4
6.4.2 Advanced Settings
The Advanced Settings are additional menu options that are not changed very often and thus are not included
in the Basic Settings.
•
To change any option/feature in the Advanced Settings, press the ‘
Settings
’ button continuously for 3 Sec.
•
Menu ‘P001’ is displayed. Use the arrows to scroll to the setting you want to change, and then press
OK
.
•
Use the arrow button to change the setting and press
OK
to confirm.
•
Scroll to change additional menu options or press
STOP
to go back to the main display.
Below are the Advanced Settings options:
Screen
Setting
Description
Options
P001
Mowing
Frequency
(Default =
2
)
•
Controls the frequency of mowing cycles in a particular
zone of your lawn.
•
The
default
mowing frequency is
Medium
(equivalent to two
mowing cycles in a week). It means that Robomow will complete
the entire mowing of your lawn twice a week.
•
The numbers in the menu represent the following values of
mowing frequency:
1 – LOW (one mowing cycle in a week)
2 – MEDIUM (two mowing cycles in a week)
3 – HIGH (equivalent to daily mowing)
•
The ‘Mowing Frequency’ option is only available for zones where a
base station is installed. If you have defined at least one seprated
zone with a base station (see menus P013 and P014), then you
will be prompted to select the relevant zone before changing the
setting (L1 stands for the Main Zone, L2 stands for Separated
Zone A, etc.)
•
During off-season when the growth rate of the grass is slower,
it is recommended to change the Mowing Frequency to ‘LOW’.
This resting period helps the grass and prolongs the lifetime of
the mower.
•
Grass growth rate changes during the year (depending on
temperature, grass type, fertilizing etc.).
•
High fertilization and favorable weather conditions may cause the
grass to grow faster. In such cases, set the ‘Mowing Frequency’
option to High.
1
/
2
/
3
P002
Islands (Default =
OFF
)
•
In case there is a large perimeter island (a swimming pool, a pond, a
large flower bed, etc.) in a particular zone, it is recommended to set
this setting to On. This will prevent the mower from following the wire
around such island, while returning to the Base Station.
•
When the Islands feature is set to On, the mower will execute a
special method of searching for the Base Station. As a result it may
take the mower more time to arrive to the Base Station.
•
See also menu P006 below.
On
/
OFF
Содержание MC1200
Страница 1: ......
Страница 58: ...57 EN ...