RoboLabs ROBOPOP 60, Руководство по эксплуатации, Страница: 23 / 39

tm2692 Jan-20
23
steel brush or other tool that provides strong impact on grease layer on rollers’
surface.
Oil nozzle cleaning
Use a damp cloth with mild detergent to wipe oil nozzle.
Salt tube cleaning
Remove salt tube and wash it with warm water. Dry it completely before taking
back on the machine. Failed to dry may lead to tube clogging!
Chamber cleaning
It is necessary to clean the chamber of husk and dust once a day. To clean the
chamber, unfasten the latches which hold the hatch, and pull it out. After that,
remove husk and debris from the chamber. It is handy to use a vacuum cleaner
for this operation.
After cleaning, place the hatch back and fasten up the latches.
During long time operation, certain amount of corn dust is accumulated in the
chamber. It is important to clean mesh screen.
Open the chamber. There is a baffler in the center. The mesh screen is behind
the baffler. Normally there is enough room to get access to the screen in order
to clean it. However, if required, baffler can be removed. To do so, remove two
bolts that fix the baffler to sidewalls. Then pull the baffler out. Once mesh
screen is cleaned, put the baffler back and fix it with the bolts.
Make sure that chamber sensor head (little red dot next to temperature sensor)
overtops the chamber wall, and its surface is free of dust. Clean it gently with
soft dry cloth if required.
Corn dispensing tube cleaning
Corn supply tube may be cleaned with a cleaning brush included in the delivery
set. Operate the brush from the side of loading funnel and from the side of
chamber.