RoboLabs ROBOPOP 60 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 39

RoboLabs ROBOPOP 60 Скачать руководство пользователя страница 14

tm2692 Jan-20

14

2.3. Program settings

Machine settings directly affect popcorn quality as well as machine operation. It
is important to understand the way each parameter or setting affects end
product and machine operation; and also the way how settings interact to each
other.

There are two settings groups: program settings and system settings.

Popping temperature

Popping  temperature  is  to  be  chosen  by  user.  During  operation,  the  machine
maintains  the  chamber  temperature  at  this  value.  Due  to  different  features  of
used  corn  and  chosen  settings,  and  also  nature  of  complex  processes
happening in the chamber, slight temperature fluctuation is allowed (±5°C).

Popping temperature affects the way how popcorn pops; its shape and size.
Too high values lead to smaller popcorn. Too low values lead to reduced
productivity, improperly popped kernels, and chamber clogging.

Common popping temperature for Butterfly is between 200 and

215°C; for

Mushroom between 210 and

225°C.

Due to constructive features, it takes few minutes to see the result once the
temperature has been changed. Current chamber temperature can be found in
the upper left corner of the popping screen.

Oil and salt feed rate

Oil and salt are only available in Butterfly program only. Oil and salt feed rate
values directly affect amount of oil/salt to be supplied to the product for the
same time.

2.4. System settings

System settings can be accessed from the start screen or from popping screen.
Press SETTINGS, enter password

‘6666’, and confirm with ENTER. System

settings screen will appear:

«
...
12
13
14
15
16
...
»

Содержание ROBOPOP 60








































Отзывы:

Нет отзывов