tm2627 Jan-20
9
Floss pan indentations (shown above) should fit rubber support legs (17).
carefully install silicone collar (5) on the stator with the collar edge overlapping
the pan.
2.3. Operation
Before turning on the machine, first add 1½ cup flossugar to the spinning head,
or approximately ¾ full. The minimum recommendation is 1/3 full at all times.
Manually rotate the head in order to distribute the sugar evenly.
You will need sticks, rods or cones to spin above the machine to collect the
cotton floss as it is produced. These can be made of wood, paper or plastic.
The longer the sticks, the larger the servings of cotton you can create. For the
Robo JetFloss the ideal length is 1 ½ ft – 2 ft.
Wood sticks and plastic straws should be soaked in water first in order to create
better adhesion for the floss.
Turn main power switch (11) ON and the spinning head will begin to rotate.
VIBRATION OF THE SPRING MOUNTED CHASSIS DURING FLOSS HEAD ACCELLERATION AND
DECELLERATION IS NORMAL.
