Robopop 25 user manual Nov-20
2.3. Quick start guide
THE VERY FIRST BATCH OF CORN IS NOT INTENDED TO
EAT!
MAKE SURE THE CHAMBER IS CLEAN BEFORE TURNING
MACHINE ON!
1. Fill the hopper with raw corn and prepare a container for popped corn.
2. Press START/PAUSE button to turn the machine on. Heat up starts
automatically.
3. It takes about 15 minutes to reach the set temperature.
4. Corn feed starts automatically.
5. Wait for the feeder to be empty. It will take not more than 15 minutes.
6. Turn off the machine by pressing the COOLING/TURN OFF button. The
machine will automatically switch into cooling mode, and then will be shut off
completely. The cooling stage takes 10 minutes approx.
P
AUSE
MODE
Press the START/PAUSE button to enter in the pause, to suspend operation.
Machine will execute current cycle normally, but won’t start next one. Sifter will
stop in a few minutes. Press START/PAUSE button again to resume operation,
or press COOLING/TURN OFF button to switch the machine in the cooling
mode.
C
HAMBER
PURGE
FEATURE
During warming up stage, chamber purge procedure is activated at the same
time as the sifter starts to rotate. Thus the chamber is being emptied of scrap
left there before.
Also, if COOLING/TURN OFF button is kept pressed during cooling stage for
more than 3 sec, then chamber purge cycle is activated. Use this feature to
clean the chamber without opening it.
11
