RoboJet Wiso, Руководство пользователя

Страница: 29 / 42

Robo
Jet
Instrukcja obsługi | User Manual RoboJet Wiso
29
OPERATION MANUAL
NOTE: Device is not intended to clean covered or coated windows!
1.
Do not use the robot on a framed window with a frame smaller than 5mm.
2. If device status indicator flashes red after powering on, plug robot in.
3. If the blue lights flashes, the back-up
battery requires charging. Keep RoboJet
Wiso plugged in to charge the back-up battery until you hear a sound. The
robot will not clean when device status indicator flashes red.
4. Device can clean framed or frameless glass, larger than 50 x 70 cm.
5. If the window is covered with dirt, clean a
small area on the glass before use and place robot there.
6. Make sure there is a 13cm clearance between the glass and obstacles in t
he room like curtains or furniture.
7.
Device can clean horizontally mounted glass but only while using the
direction control buttons on the remote control.
8. Device can clean glass mounted at an angle; in such a case, a person
should be in the vicinity to assist.
9. Do not use device in the position with cleaning cloths facing towards top, it
may risk a fall.
10. Device should only be used with RoboJet Wiso glass cleaner. Using other
liquids may affect the work and the condition of the device.
11. Before using the device on a glass with an uneven surface (frosted, textured,
coated glass) please refer to the manufacturer's instructions regarding the
≥5mm
≥50cm
≥70cm