Page 4 of 12
3.0
EDFA CONTROLS, INDICATORS, AND ALARMS
This section of the manual will give an overview of the available menus in the
EDFA-4429 series EDFA and their descriptions. All instructions in this section 3.0
refer to the representation of the front panel shown in the diagram below. The user
can scroll through the EDFA menus by using the push buttons that are on the front
panel on the right of the LCD screen.
3.1
Operation of the panel
3.1.1
Open menu
A. Connect 48V power supply
B. Turn on power switch in the back panel,
Front panel displays "KEY OFF"
Laser Status lamp is Red
C. Input power, then press laser start-up key switch
Front panel shows "
KEY ON…"
，
Laser status lamp turns green
from red.
3.1.2
Start-up main menu
Press
▲
/
▼
buttons and the following menu will be displayed in a
sequence cycle.
Menu #1 -
Model
Read-only menu, tells the type of this equipment
Menu #2 -
S/N
Read-only menu, tells the
serial number of this equipment
Menu #3 -
Input
Read-only menu, tells the input optical power of EDFA
Menu #4 -
Set Output
Adjustable list, set the output power in dBm
Menu #5 -
Total Output
Read-only menu, tells the output optical power of EDFA in dBm.
