ROBLIN atrium 3 centrale, Инструкция по использованию и установке

Страница: 12 / 26

10
Reverting to the extraction mode (The cooker hood is ducted to the outside).
Press the ‘+’ button (while the motor and lights are switched ‘ FF’) until the ve LE lights will ash once
to indicate con rmation that the cooker hood is in the extraction mode.
G B
ASIC INSTRUCTIONS
Lighting
Press LE button 1 to switch ‘ N’ the lights and the LE will illuminate to con rm the lights are switched
‘ N’.
Motor
Press LE button 2 to switch ‘ N’ the fan motor (and ad ust the speed of the fan motor by pressing the
LE button ‘+’ and ‘-‘) and the LE lights 2, 3 and 4 will illuminate. The fan speed will be increased if
constant pressure is kept on the (+) button.
LE 2 : inimum speed - cooking with one pan or simmering
LE 2 3 : edium speed - normal cooking with up to 4 pans
LE 2, 3 4 : aximum speed - frying and cooking foods with strong odours
Press LE button 5 to obtain the boost position for maximum effect and the LE will illuminate to con rm
fan is switched ‘ N’.
G B
I
After 200 hours use, LE will indicate that you must clean the metal grease
lters. (See chapter on ‘ aintenance’).
To reset the 200 hours timer back to zero requires the motor and lights must be switched ‘ FF’ then and
proceed as follows:
Press the LE button ‘+’ for 3 to 4 seconds and the LE lights 1,2,3, 4 and 5 will ash to con rm the
programme has been reset to zero.
B
I
After 400 hours use, LE will indicate that you must replace the active charcoal
lter and clean the metal grease lters. (See chapter on ‘ aintenance’).
To reset the 400-hour timer the motor and lights must be switched ‘ FF’.
Push the LE button ‘+’ for 10 seconds.
ne ash of the LE lights 1,2,3,4 and 5 function is switched ‘ FF’.
Two ashes of the LE lights 1,2,3,4 and 5 function is switched ‘ N’.
Instructions for replacing the active charcoal lter are given in the chapter on ‘Recycling’.
our cooker hood is supplied with a deactivated remote control receiver. To use the cooker hood with a
remote control re-programme the hood as follows:
Press the LE button (Lighting) ‘1’ while the motor and lights are switched ‘ FF’, until the LE lights 1 will
ash to con rm the programme has been activated :
O LE O
T LE ON
Caution, the remote control handset must be tted with standard LR03-AAA size 1.5V zinc-carbon alkaline
batteries as illustrated Fig. . These batteries should give a long life and constant discharge throughout their
life. These batteries must be disposed of properly and could explode if damaged or exposed to heat.
ispose of batteries in the appropriate sort container to protect the environ
-
ment.