Robinsons Renown Dwarf, Руководство по сборке

Страница: 38 / 40

38
USEFUL
INFORMATION:
ROBINSONS VENTS
are slid
into position down the ridge.
AUTOVENTS come as standard
on each window allowing auto-
matic climate / airflow in your
greenhouse.
ROOF BAR CAPPING:
The bar capping in your roof
comes in two sections and is
then covered with a longer full
length cover cap.
The Dwarf wall model shown
throughout this help sheet is
a Royale on a 2' (610mm)
wall. Some of the other
models also have a dwarf
wall option. The information
shown in the pictures is how-
ever, relevant to all models.
4' Front
purling.
It should be fitted
above the door to
give extra strength
horizontally across
from the roof bars. If
you are having diffi-
culty getting the holes
to line up push up-
wards on the ridge
and its adjoining roof
bars.
Internal view of rear right hand corner. The
rear purling is seen on this picture which
spans the back of the green house. Extra
bolts need to be slid into each vertical glazing
channel in the rear to allow the purling to be
attached. In this case the purling is fitted at
the ends using the same long bolt that joins
the roof and side corner bars together. At
this height the purling will not interfere with any
shelving that you may have. A separate bolt
can be used in the corners if you wish.
Rear purling.
Obscure toughened glass was fitted in
the side of this model for privacy. This
has to be supplied by the customer at
an independent glazier.
TYPICAL ROYALE DWARF WALL CASE STUDY