19
Operating Instructions
Start/Pause button
To start the selected program, press the Start button.
If you switch your machine to standby mode, the Start/Pause indicator on the electronic display will blink.
Child Lock
•
The Child Lock function allows you to lock the buttons so that the wash cycle you have chosen cannot be
changed unintentionally.
•
To activate child lock, press and hold button 3 and 4 simultaneously for at least 3 seconds.
‘’CL’’
will flash on
the electronic display for 2 seconds when the child lock is activated.
•
If any button is pressed or selected program is changed by the program dial while the child lock is active, the
“CL”
symbol will flash on the electronic display for 2 seconds.
•
If the child lock function is active and a program is running, when the
•
program dial is turned to the CANCEL position and another program is selected the previously selected program
continues from where it was left.
•
To deactivate the child lock, press and hold button 3 and 4 simultaneously for at least
3 seconds until the “CL”
symbol on the electronic display disappears.
Cancelling Programme
To cancel a running program at any time:
•
Turn the program dial to the “CANCEL” position.
•
Your machine will stop the washing operation and the program will be cancelled.
•
Turn the program dial to any other program to drain the machine.
•
Your machine will perform the necessary draining operation and cancel the program.
•
You can now select and run a new program.
Finishing Program
Your machine will stop by itself as soon as the program you have selected finishes.
•
“END” will flash on the electronic display.
•
You can open the machine’s door an
d remove the laundry.
•
Leave the door of your machine open to allow the inner part of your machine to dry.
•
Switch the program dial to STOP position.
•
Unplug your machine.
•
Turn the water tap off.
