5
Operating the Stainless Steel gooseneck tap
The tap is operated in conjunction with the Hot and Cold (H&C) indicators on the tap handle.
Please follow below instructions:
1.
Open the door to its most open position. Unscrew the two screws in the bottom left hand corner. From inside
the unit pull the hinge pin downwards to release the door.
2.
Manoeuvre the door to allow removal from the Laundry tub.
3.
Unscrew the two screws in the top left hand corner. From inside the unit pull the hinge pin upwards.
4.
Insert the hinge pin in the bottom right hand location and secure with two screws.
5.
Turn door around. Locate the door on the bottom right pin. Sing the door fully open and insert the hinge pin
in the top right location and push down to locate in the door.
6.
Secure with two screws. Check operation of the door.
Installing the washing machine water inlet and waste outlet
Operating Instructions
Operating the washing machine by adjusting 3 way ball valves
1.
To use the washing machine from the mains water supply, simply turn the 3 way ball valves quarter turn
valve on. (Shown as above)
2.
To isolate the washing machine from the mains water supply, simply turn the 3 way ball valves quarter
turn off. This will isolate the washing machine from the mains water supply but still allow water to flow
through the laundry tub tap. (Shown as above)
Changing the door from right to left opening
1
2
Washing machines hoses
Some parts are hidden for clarity