3
Overview
Pre-installation
Thank you for purchasing a quality Robinhood rangehood. Robinhood has a high standard of quality control and
every rangehood is tested and approved before it leaves the factory.
Important:
Please read the entire instructions before installing the rangehood.
Always switch power off prior to installation.
All electrical work must be done in accordance with local and national electrical codes as applicable.
For safety, this product must be earthed.
A power outlet should be within 1000mm of the power cord exit from the rangehood.
The socket must be accessible and enable the end user to isolate the rangehood from the power for the purpose
of internal cleaning or maintenance.
Stainless steel or powder coat is very easily damaged during installation if abraded or knocked by tools. Protect
the rangehood with the cardboard box or plastic bag during installation.
All ducting must comply with local requirements and building codes.
Suitable fixings will be required to mount this rangehood.
See Ducting options next page.
Contents of packaging:
1 x rangehood
1 x Installation sheet
1 x Installation kit -
“SIDE FIXING”
1 x Installation kit -
“TOP FIXING”
1 x Charcoal Filter (RO61SS/WH/80 only)
Multiple Handle Colour Options
Typical equipment required:
o
electric drill
o
screwdriver
o
tape measure
o
spirit level
o
duct tape
(if ducting)
o
jig saw
(if ducting)
o
ladder
(if ducting)
Front
Side
Plan
