Instructions on use - continued
Minute Minder
When the oven is running a cooking function or just in Operating mode (the Oven In Use symbol is on), the Minute Minder
function can be used. This is an alarm that can be set, but does not effect the operation of the oven in any way.
Press the Mode button twice until the Minute Minder symbol (5) starts to flash. While it is flashing, use the Minus button (9)
and Plus button (10) to adjust the length of time. This will be set 5 seconds after the last button is pressed and the display will
revert back to the current time (this can be checked or even adjusted by pressing the Mode button twice again). To cancel the
Minute Minder, reset the length of time to 0. Once the Minute Minder time runs out, an alarm will sound and the Minute Minder
symbol will flash. Turn off by pressing any button.
Timer
The Timer function is used to stop the oven cooking functions after a certain time. Put oven into Operating mode and adjust
the cooking functions and temperature. Prepare the food and place in the oven when temperature is reached. Press the Mode
button 3 times until the Oven in use symbol (4) and Auto Function symbol (6) are flashing (the display shows the current timer
time 0.00). With the symbols flashing, adjust the timer time with the Plus and Minus buttons. The Time will set 5 seconds after
the last button is pressed and the display will revert to the current time (the Oven in use symbol and Auto Function symbol will
stay on). The remaining time can be checked by pressing the Mode button 3 times, and then adjusted (if needed) using the
Plus and Minus buttons at any time.
Once the time has elapsed, an alarm will sound , the oven function will stop running and the Oven in use symbol and Auto
Function symbol will flash. Press any button to stop the alarm (oven reverts to Operating mode), turn off oven functions, turn
thermostat to 0 and reset to standby mode. Remove food from oven.
Timer End
The Timer End function allows you to set up the time when the cooking function will end. Put oven into Operating mode and
adjust the cooking functions and temperature. Prepare the food and place in the oven when temperature is reached. Press the
Mode button 4 times until the Oven in use symbol (4) and Auto Function symbol (6) are flashing (the display shows the current
time). With the symbols flashing, adjust the end time with the Plus and Minus buttons. The end time will set 5 seconds after
the last button is pressed and the display will revert to the current time (the Oven in use symbol and Auto Function symbol will
stay on). The remaining time can be checked by pressing the Mode button 4 times, and then adjusted (if needed) using the
Plus and Minus buttons at any time.
When the end time has been reached, an alarm will sound , the oven function will stop running and the Oven in use symbol
and Auto Function symbol will flash. Press any button to stop the alarm (oven reverts to Operating mode), turn off oven
functions, turn thermostat to 0 and reset to standby mode. Remove food from oven.
Automatic Cooking
The Automatic Cooking function allows you to set up a fixed length Timer which ends at a pre-set time (for example to set up a
1 hour cooking time that ends in 2 hours time). Note: do not leave raw meats in the oven for extended lengths of time before
cooking.
First set a Timer for the cooking length of time (see Timer section above). At the end of setting this, press the Mode button
once before the symbols stop flashing (within 5 seconds of the last button pressed). Set up the Timer End function, and let the
function set. The Oven will stay in standby mode until the correct time is reached, then start operating for the pre-set length of
time and end at the pre-set Timer End time.
When the end time has been reached, an alarm will sound , the oven function will stop running and the Oven in use symbol
and Auto Function symbol will flash. Press any button to stop the alarm (oven reverts to Operating mode), turn off oven
functions, turn thermostat to 0 and reset to standby mode. Remove food from oven. Like all of the Timer functions, the timer
can be cancelled by resetting time values to 0 or changing the oven to standby mode.
7
