3
Installation
Built-in induction cooktop cutout dimensions.
HIB604TFG
A (mm)
580
B (mm)
510
C (mm)
560
D (mm)
490
E (mm)
60
F (mm)
15
G (mm)
50
H (mm)
4
Ventilation Requirements
All Induction cook tops are fitted with cooling fans that draw
fresh air in from the rear of the unit and expel the warm air
through vents at the front.
When installing your cooktop the following ventilation
requirements are as follows;
•
A 5mm ventilation cut out below the bench top the
width of the cook top
•
A 10 mm ventilation cut out in the base of the kick
plate
•
A 50 mm gap behind the oven or draws
•
A minimum gap of 30 mm between the oven and base
of the cooktop.
•
Ventilation gaps should not be obstructed by any
drawers, cupboards, etc.
This diagram is a typical example when fitted above an oven
or drawers.
