Installation –
electrical cable connection
MUST BE COMPLETED BY A REGISTERED ELECTRICIAN
.
2
1
The ceramic hob is manufactured to work with three-phase alternating
current (400V3N~50Hz).The voltage rating of the ceramic hob heating
elements is 230V. Adapting the ceramic hob to operate with one-phase
current is possible by appropriate bridging in the connection box according
to the connection diagram below. The connection diagram is also found on
the
cover of the connection box. Remember that the
connection wire should match the connection type
and the power rating of the ceramic hob.
The connection cable must be secured in a
strain-relief clamp.
Warning!
Remember to connect the safety circuit to the connection box terminal
marked with . The electricity supply for the ceramic hob must have a
safety switch which enables the power to be cut off in case of emergency.
The distance between the working contacts of the safety switch must be at
least 3mm.
Before connecting the ceramic hob to the power supply it is important to
read the information on the data plate and the connection diagram.
