Robin Robin MMX Spot, Руководство пользователя

Страница: 26 / 49

6
and [down arrow] and set all desired effects.
An item "Step Time" (value of 0-5.5 sec.) is the time during which effects last in the current step
5. Save adjusted effects to the current step by touching the [confirm] or save and copy them to the following
step by touching the [copy]. By touching the text box "Preview" next to the current program step you
can view created scene.
6. Repeat the steps 4 and 5 for next program steps.
7. After editing desired program steps, adjust the length of the program by touching the text boxes "Start Step"
and "End Step".
Meaning of the icons used in the "Edit Program" menu:
- moves down on the next page - saves adjusted values and leaves menu
- moves up on the previous page - saves values to the current step and copy them to the
following prog. step
- leaves menu without saving values
There is a chart describing behaviour of items "Pan/Tilt Macro" and "P./T. Macro Speed".
DMX
0 - 9
0 - 3
3 - 63
64 - 95
96 - 7
8 - 59
60 - 9
9 - 3
4 - 55
Pan/Tilt Macro
Disabled pan/tilt macro
Reserved
Figure of circle (from small to large)
Figure of horizontal eight (from small to large)
Figure of vertical eight (from small to large)
Figure of rectangle (from small to large)
Figure of triangle (from small to large)
Figure of star (from small to large)
Figure of cross (from small to large)
0
- 7
8 - 9
30 - 55
Pan/Tilt Macro Speed
No macro generation
Macro generation from fast to slow-forwards
No macro generation
Macro generation from slow to fast-backwards
7.6 Tab "Service"
Adjust DMX Values
- The menu allows you to set all effects to desired positions before fine calibration of the
effects .
Adjust Lamp
- This item opens the light output of the fixture and enables to focus the light beam on the wall
to perform the fine lamp adjustment.
Calibrations - This menu enables fine calibration of fixture effects and download default calibration values.
Calibrate Effects - The menu allows the fine adjustment of effects. The menu contains list of effects
which can be calibrated:
Pan - a fine pan movement
Tilt - a fine tilt movement
Colour Wheel - a colour wheel Prism - a prism module
Cyan - cyan flags Iris - an iris module
Magenta
- magenta flags
Zoom
- a zoom module
Yellow
- yellow flags
Focus
- a focus module
CTO
- CTO flags
HotSpot
- a fine movement of reflector
Static Gobo
- a static gobo wheel
Dimmer 1
- a dimmer lamella
Rot. Gobo Wheel
- a carousel of rotating gobos
Dimmer 2
- a dimmer lamella
R. Gobo Index
- an indexing of rotating gobo
By using these items you can calibrate and adjust effects to their right positions.
Calibration via the control board
1. Disconnect DMX controller from the fixture and enter the "Calibrate Effects" menu.
2. Use the [up arrow] and [down arrow] to find desired effect and touch it to enter the fine effect adjustment
screen.