Robin CycFX 4 Wireless DMX CRMX Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 28

Robin CycFX 4 Wireless DMX CRMX Скачать руководство пользователя страница 5

Robin CycFX 4

5

3. Installation

3.1 Rigging the fixture

The Robin CycFX 4 can be rigged in any orientation on a truss without altering its operation characteristics.
Installation on a truss allows the mounting adapters Omega T (1) fastened to the fixture base with ¼-turn quick
locks. Also  standard Omega holders for Robe fixtures or mounting bar CF4 (optional accessory) can be used
instead mounting adapters. Pull the safety wire  through the attachment point (2) and around the truss.
For overhead use, always install a safety wire that can hold at least 10 times the weight of the fixture. You must
only use safety wire with screw-on carbine.

Ensure that the structure (truss) to which you are attaching

the fixture is secure

Caution:

Fixtures may cause severe injuries when crashing down! If you have doubts concerning the safety of a

possible installation, do not install the device and consult installation with an expert.

3.2 Connection to the mains

Fixtures must be installed by a qualified electrician in accordance with all national

and local electrical and construction codes and regulations.

Install a suitable plug on the power cord, note that the cores in the power cord are colored according to the
following table.

Core (Eu)

Core (US)

Connection

Plug Terminal Marking

Brown

Black

Live

L

Light blue

White

Neutral

N

Yellow/Green

Green

Earth

This device falls under class one and must be grounded!

Design of the Robin CycFX 4 allows to connect several fixtures to AC mains power in one interconnected daisy
chain using power input and throughput connectors. Needed daisy chain cords are stated in the  chapter
“Technical specifications “
The max. number of connected fixtures depends on the AC mains power voltage:
30 fixtures at power supply= 230V
14 fixtures at power supply= 120V
12 fixtures at power supply=100V
Do not overload the supply line and the connecting leads.

«
...
3
4
5
6
7
...
»

Содержание CycFX 4 Wireless DMX CRMX





























Отзывы:

Нет отзывов