Robin CycFX 4 Wireless DMX CRMX, Руководство пользователя

Страница: 16 / 28

Robin CycFX 4
16
6. Control menu
The Robin CycFX 4 is equipped with 2-line LCD display which allows to set the fixture´s behaviour according to
your needs, obtain information on its operation, control various range of effects and lastly program it, if it has to be
used in a stand-alone mode.
Control board:
[ESCAPE] button used to leave the menu without saving changes.
[NEXT] , [PREV] buttons for moving between menu items and for value adjusting.
[ENTER] button used to enter the selected menu (menu item) and to confirm adjusted value.
After switching the fixture on, display shows current DMX address
.
Note : to turn the display , press and hold the [ESCAPE].
6.1 Addressing (DMXA)
Set DMXA - Use this menu item to set the DMX start address of the fixture, which is defined as the first channel
from which the Robin will respond to the controller.
If you set, for example, the address 15, the Robin CycFX 4 will use channels 15 - 28 for control (if Mode 1 is
selected).
Please, be sure that you do not have any overlapping channels in order to control each Robin CycFX 4 correctly and
independently from any other fixture on the DMX data link.
If there is no data received at the DMX input, the display will start to flash "0001” with actually stored DMX
address.
6.2 Fixture information (Info)
POn Time - Power on time . Select this menu to read the number of fixture operation hours.
Total - The item shows the total number of the operation hours since
the Robin CycFX 4 has been fabricated.
Reset
- The item shows the number of the operation hours that the
Robin CycFX 4 has been powered on since the counter was last reset.
In order to reset this counter to 0, press and hold both [NEXT] and [PREV] buttons and the
[Enter] button at the same time.
DMX In - DMX readout. The menu is used to read DMX values of each channel received by the fixture.
Temp - Temperature . The menu shows temperature in the moving LED head.
Current - A current temperature of the moving LED head.
Highest - A maximum temperature of the moving LED head since the fixture has
been fabricated.
High Res - A maximum temperature of the the moving LED head since the counter
was last reset.
In order to reset this counter, press and hold both [NEXT] and [PREV] buttons and the
[Enter] button at the same time.