Robin C01060, Руководство пользователя

Страница: 12 / 56

gf11
11
Manual Robin Compact SIP ENG - v. 3.0.1
3.3 Tools and materials required for mounting
The following are required when mounting the Robin SIP:
 core drill, 90 mm in diameter

masonry drill, 6 mm in diameter
 stone chisel
 general set of tools

anti-theft Allen key (supplied)
 anti-theft screws (supplied)
 6mm wall plugs (supplied)
 drilling template (supplied)
 tie wrap (supplied)
3.4 Mounting instructions
Follow the step-by-step plan described below for problem-free mounting of the Robin SIP
Step-by-step plan:
1. Drill holes of 90 mm in diameter and 60 mm in depth.
Use the drilling template supplied in the package for this.
2. Remove the cores from the drillings using the stone chisel.
Shape the hole so that the plastic housing of the Robin SIP fits with room to spare.
3. Feed the cable into the hole, leave enough excess length for a loop in the hole.
4. Drill the four fixing holes for the front panel using the drilling template and insert the wall
plugs supplied with the set into the holes.
5. Connect the Ethernet cable to the clamb connector. (page 10)
6. Optional - connect the cable for operating the door switch to the clamb connector.
7. Secure the cable to the plastic housing using a tie-wrap.
8. Position the Robin SIP in the hole in such a way that the looped cable fits neatly behind the
device.
9. Fix the device securely in place using the anti-theft screws supplied in the package.