Robin America EH63, Руководство по обслуживанию

Страница: 42 / 85

– 39 –
14) STARTER MOTOR
Install starter motor.
M8 x 65 Flange bolt : 2 pcs.
Tightening torque
16.6 - 18.6 N
・
m
(170 - 190 kgf
・
cm)
(12.3 - 13.7 ft
・
lb.)
11) BREATHER PIPE and COVER
Attach breather plate (breather valve) and
breather cover to crankcase using proper
gaskets.
Put breather plate in such position as its reed
valve opens outside.
M6 x 14 Flange bolt : 2 pcs.
Tightening torque
2.9 - 4.9 N
・
m
(30 - 50 kgf
・
cm)
(2.2 - 3.6 ft
・
lb.)
GASKET , breather plate
BREATHER PLATE
GASKET , breather plate
BREATHER COVER
M6 FLANGE
BOLT
12) SPARK PLUG
Install spark plug to each cylinder head.
Check the carbon and heat damage around electrode and clean or replace with new one as necessary.
Spark plug : NGK - BPR4EY
Tightening torque
New plug
13) CHARGE COIL
Install charge coil with the wiring located
at 2-o’clock position.
M5 x 20 bolt & washer : 4 pcs.(15A coil)
M5 x 25 bolt & washer : 4 pcs.(30A coil)
Tightening torque
2.9 - 3.9 N ・ m
(30 - 40 kgf ・ cm)
(2.2 - 2.9 ft ・ lb.)
CHARGE COIL
ELECTRIC
STARTER
PULLING
M8 FLANGE
BOLT : 2 pcs.
NOTE ;;
* Never tighten the bolts over the specified torque, or gasket is damaged and cut.
* Replace gaskets with new ones if they are torn or damaged.
Current plug
15) CYLINDER BAFFLE
Attach cylinder baffle #1, #2 and #3.
Attach cylinder baffle #4 with the charge coil harness retracted in the dent portion.
M6 x 12 Flange bolt
11.7 - 14.7 N ・ m
(120 - 150 kgf ・ cm)
(8.6 - 10.8 ft ・ lb.)
22.1 - 26.9 N ・ m
(225 - 275 kgf ・ cm)
(16.3 - 19.8 ft ・ lb.)