- 30 -
5-4-5 FLYWHEEL
Installing the flywheel
Degrease the crankshaft and the tapered portion
of the flywheel perfectly when installing them.
Align the flywheel key with the crankshaft key
groove.
Flywheel tightening bolt M6 x 16 mm, with spring
washer :
Fig. 5-35
Tightening torque : 9 - 12 N
・
m
(90 - 120 kgf
・
cm)
(6.5 - 8.8 ft
・
lb.)
5-4-6 IGNITION COIL
Installing the ignition coil (Air gap adjustment)
Air gap : 0.3 mm
Ignition coil tightening torque
M4 x 20 mm, with washer and spring washer
(2 pcs.)
NOTE :
Measure the air gap between the flywheel mag-
net and the ignition coil.
Fig. 5-37
Tightening torque : 2 - 4 N
・
m
(20 - 40 kgf
・
cm)
(1.4 - 2.9 ft
・
lb.)
Fig. 5-36
THICKNESS GAUGE
PLUG CAP
IGNITION
COIL
FLYWHEEL
FLYWHEEL
M6 BOLT AND
WASHER : 1 pc.
Содержание EH025
Страница 1: ...SERVICE MANUAL EH025 EH035 ENGINE Model PUB ES1740 Rev 05 03 ...
Страница 66: ...PRINTED IN THE USA ...