Robin America EH025, Руководство по обслуживанию

Страница: 29 / 66

- 25 -
Fig. 5-25
Step Parts to remove Remarks and procedures Fasteners
10
Piston and Piston ring 1)
2)
Remove the two piston clips, take
out the piston pin, and then
remove the piston from the small
end of the connecting rod.
When removing the piston, take
care to prevent dust from getting in
the bearing at the connecting rod
small end.
To remove the two piston rings
and the oil ring, open wide the
open end of the rings and remove
them from the piston.
Take care not to widen the open
end of the rings too much, or the
rings may break.
PISTON PIN
PISTON
PISTON RING
CRANKSHAFT
CLIP
CLIP
STEP 10