If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
12
Operating your radio - FM
1.
Fully extend the telescopic aerial.
2.
Press the
StandBy button
to switch on your radio. The display will
show "Roberts DAB digital radio" for a few seconds.
3.
Press the
Band button
to select the FM band.
4.
Press and immediately release the
Auto Tune button
, your radio will
scan in an upwards direction (low frequency to high frequency) and
stop automatically when it finds a station of sufficient strength.
5.
After a few seconds the display will update and show station name.
6.
To find other stations press and release the
AutoTune button
as
before.
7.
To scan the FM band in a downwards direction (high frequency to low
frequency) press and hold down the
AutoTune button
for 0.5
seconds and then release.
8.
When the waveband end is reached your radio will recommence
tuning from the opposite waveband end.
9.
Adjust the
Volume, Tone and Deep bass boost switch
to the
required settings.
10. To switch off your radio press the
StandBy button
.
2
3
4
9
9
9
10
