Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to
fi
nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press and release the
On/Off
button to switch on your radio.
2. Press and release the
Mode
button until the FM mode is selected.
3. Press and hold the
Info/Menu
button. The FM menu will show on the
display.
4. Rotate the
Tuning
control or press and release the
Tuning Up
or
Down
buttons
until
'SCAN'
shows on the display. Press and release
the
Select
button.
5. Rotate the
Tuning
control or press and release the
Tuning Up
or
Down
buttons to switch between
'LOCAL'
and
'DISTANT'
options
on the display. The Distant option will allow the radio to
fi
nd weaker
signals when scanning.
6. Press and release the
Select
button to con
fi
rm your selection. The
radio will then revert to the normal information display. The Local or
Distant setting is stored in the radio and remains in force until changed
or until a System Reset.
Note:
The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
17
4-6
4,5
3
4,5
4,5
Mode
2
