14
Operating your radio - FM auto-tune
1. Carefully fully extend the telescopic aerial located on the rear of your
radio.
2. Press and release the
On/Off
button to switch on your radio.
3. Press and release the
Mode
button until the FM mode is selected.
4. Press and hold the
Tuning Up
button for 2 seconds or rotate the
Tuning
control clockwise and then press and release the
Auto Tune
button
to cause your radio to search from low frequency to high frequency
and to stop automatically when it
fi
nds a station of suf
fi
cient strength.
5. After a few seconds the display will update. The display will show the
frequency of the signal found. If the signal is strong enough and there
is RDS data present then the radio may display the station name.
6. To
fi
nd other stations press and hold the
Tuning Up
button for 2
seconds or press and release the
Auto Tune
button as before.
7. Press and hold the
Tuning Down
button for 2 seconds or rotate the
Tuning
control anti-clockwise and then press and release the
Auto
Tune
button to cause your radio to search from high frequency to low
frequency and to stop automatically when it
fi
nds a station of suf
fi
cient
strength.
8. When the end of the waveband is reached your radio will recommence
tuning from the opposite end of the waveband.
9. Adjust
the
Volume, treble
and
bass
to the required settings. To switch
off your radio, press and release the
On/Off
button.
Mode
3
4-7
7
4,6
4-7
2,9
9
9
9
