If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
42
System reset
If your clock radio fails to operate correctly, or some digits on the display
are missing or incomplete carry out the following procedure. The system
reset can be carried out while the unit is in standby mode or while playing.
1. Press and release the
Menu
button.
2. Press
the
Tuning Up
or
Down
buttons until
'Factory Reset'
appears
on the display. Press and release the
Select
button.
3. Press the
Tuning Up
or
Down
buttons until
'Yes'
appears on the
display. If you do not wish to carry out a system reset, highlight
'No'
and then press the
Select
button. The display will revert to the previous
display.
4. With
'Yes'
displayed, press and release the
Select
button. A full reset
will be performed. The station list and presets will be erased. Alarms
will be cancelled and snooze and sleep timer settings will be set to
their default values. The display will show
'Welcome Roberts'
and after
a few seconds a station scan search will be performed automatically.
The display will show progress of the station search. The number on
the right of the display is the number of stations that have been found.
In case of malfunction due to electrostatic discharge, reset the product
as above to resume normal operation. If you are not able to perform the
reset operation as above, removal and reconnection of the power supply
may be required.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the clock radio. Our technical helpline number
is 020 8758 0338.
1
2,3
2,3
2-4
