background image

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

5

5

1

2

Remote Control

18

Pre-setting stations

You may store up to 10 different stations on each of the two wavebands
giving a total of 20 preset stations.

1.

Switch on your radio using the 

BAND button 

on the CD clock radio

or the

 BAND button

 on the remote control.

2.

Select the desired waveband using the 

BAND button

 

 

on the CD

clock radio or the

 BAND button

 on the remote control.

3.

Tune into the required station using one of the tuning methods
previously described.

4.

Press and release the 

Prog/Random button

, the word ‘PROG’ will

flash in the display.

5.

Whilst ‘PROG’ is flashing, press either the 

up or down buttons  

on

the CD clock radio or the

 F.Skip or B.Skip buttons 

on the remote

control to the preset under which you wish to store the station.

6.

Press the 

Prog/Random button 

to store the station. The preset

number will now appear under ‘PROG’ in the display.

7.

Repeat the above procedure for the remaining presets

8.

Press the 

Standby button 

to switch off your radio.

Note: Pre-setting of stations can only be carried out whilst ‘PROG’ is
flashing in the display (10 seconds).

6

4

8

1

2

4

5

6

8

Содержание CR9987





































Отзывы: