18
Scan sensitivity setting - FM
Your radio will normally scan for FM broadcasts which are strong enough
to give good reception. However, you may wish the Auto-scan function
to also be able to
fi
nd weaker signals, possibly from more distant radio
transmitters. Your radio includes a local / distant option for the Auto-scan
function.
1. Press
the
On/Off button
to switch on your radio.
2. If needed, press the
DAB/FM button
to select the FM band.
3. Press and hold the
Info button
until the display shows "FM Scan
Zone" then press the
Select button
to enter the scan zone selection
menu.
4. Press
the
Tuning Up
or
Down buttons
to switch between Local and
Distant options on the lower line of the display. The Distant option will
allow the radio to
fi
nd weaker signals when scanning.
5. Press and release the
Select button
to con
fi
rm your selection. The
current setting will be marked with an asterisk. The radio will then
revert to the normal information display. The Local or Distant setting
is stored in the radio and remains in force until changed or until a
System Reset.
Note: The initial setting (out of the box, or after a System Reset) causes
the radio to ignore weaker (or more distant) signals.
1
2
3
4
4
3,5