11
Dynamic Range Control settings - DAB
Dynamic Range Control (also known as DRC) can make quieter sounds
easier to hear when your radio is used in a noisy environment.
1. Press
the
On/Off button
to switch on your radio.
2. Press and hold in the
Info button
. The display will show 'Manual
tune.'
3. Press the
Tuning Up
or
Down buttons
until the display shows
'DRC'.
4. Press and release the
Select button
to enter the adjustment mode.
5. Press
the
Tuning Up
or
Down buttons
to select the required DRC
setting (the default is 0).
DRC 0 - DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 - DRC level is set to 1/2 that sent by broadcaster.
DRC 1 - DRC level is used as sent by broadcaster.
6. Press and release the
Select button
to con
fi
rm the setting. The
chosen setting will be marked with an asterisk. The display will return
to normal tuning mode.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio will
have no effect.
4,6
3,5
3,5
2
1