27
System reset
If your clock radio fails to operate correctly, or some digits on the display
are missing or incomplete carry out the following procedure.
1. Press the
On / Standby
button to switch on the clock radio.
2. Press and release the
Menu
button.
3. Press
the
Tuning Up
or
Down
buttons until
'FACTORY'
appears on
the display. Press and release the
Select
button.
4. A full reset will be performed. The station list and presets will be erased.
Alarms will be cancelled and snooze and sleep timer settings will be
set to their default values. The display will show
'ROBERTS'
and after
a short time the current time and day will appear on the display.
5. See "Operating your clock radio" on page 5 for further details.
In case of malfunction due to electrostatic discharge, reset the product
as above to resume normal operation. If you are not able to perform the
reset operation as above, removal and reconnection of the power supply
may be required.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
Standby
1
2
3
3
3
