25
Display backlight dimmer
The brightness of the display can be adjusted when the radio is in standby
or when the unit is in use.
1. In order to adapt the intensity of the display to suit the ambient room
lighting, switch the
Dimmer
switch located on the left hand side of
your clock radio to select the dimmer brightness from High, Medium
and an almost off 'night-time' (Low) setting.
2. When the clock radio is in standby mode, pressing a button will cause
the radio to switch to the normal brightness level for a few seconds.
This is so that even if the standby brightness level is set to low (almost
off), it is still possible to see the time by quickly pressing a button.
Software version
The software display cannot be altered and is just for your reference.
Ensure your clock radio is switched on.
1. Press and release the
Menu
button.
2. Press the
Tuning Up
or
Down
buttons
until
'SW VER'
appears on
the display.
3. Press and release the
Select
button. The display shows the software
information.
4. Press and release the
Menu
button to exit the software display.
1,4
2
2
3
1
