Listening to the radio - FM
1. Set the
Function switch
to the 'Radio' position. The
Operation
indicator
will light up.
2. Select 'FM' using the
Waveband switch
.
3. Adjust the
Volume control
until a hissing sound is heard.
4. The
Telescopic aerial
which is only operational on FM, should be
fully extended.
5. Carefully tune to the desired station using the
Tuning control
.
6. Angle and rotate the
Telescopic
aerial
to a position giving the best
reception. A knuckle joint at the base of the aerial allows this
movement and an angle of 45 degrees will usually be satisfactory.
The FM band is marked in Megahertz (MHz).
7. To receive stereo broadcasts set the
FM mode switch
located on
the rear of your CD radio cassette to the 'Stereo' position the
Stereo
indicator
will light up. If the station being received is weak some hiss
may be audible, to reduce the hiss set the
FM mode switch
to the
'Mono' position to return to mono operation.
8. Adjust the
Deep bass boost
switch to the preferred position.
9. To switch off the radio set the
Function switch
to the 'Tape Off'
position.
7
