manualshive.com logo in svg

Roberts Blutune 60, Руководство пользователя, Страница: 7 / 56

Поделиться
Скачать
Roberts Blutune 60 Скачать руководство пользователя страница 7

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)

Using the sound system for the 

fi

 rst time

1.  Place your sound system on a 

fl

 at surface. 

2.  Fully extend the telescopic aerial located on the rear of your sound 

system. The aerial should be fully extended and positioned vertically 
for optimum reception.

 
3.  Insert the adaptor plug into the DC socket located on the rear of your 

sound system. Plug the adaptor into a standard 13 amp mains socket 
outlet. The display will show 

'ROBERTS RADIO, ENJOY LISTENING'

 

for a few seconds. During this time the sound system is scanning to 

fi

 nd a DAB radio signal. 

4.  If no signal is found, it may be necessary to relocate your sound system 

to a position giving better reception. You should then carry out a scan 
to 

fi

 nd stations as described on page 11.

IMPORTANT:

  

The mains adaptor is used as the means of connecting the 

sound system to the mains supply. The mains socket used for the sound 
system must remain accessible during normal use. In order to disconnect 
the sound system from the mains completely, the mains adaptor should 
be removed from the mains socket outlet completely.

Characters appearing on the LCD display indicate that the sound system 
is connected to and powered from the mains supply.

6

Содержание Blutune 60

























































Отзывы:

Нет отзывов