Roberts Gorden Vantage TF-120 Скачать руководство пользователя

Страница: 1 / 72

WARNING

FOR YOUR SAFETY

If you smell gas:

1.  Open windows.
  2.  DO NOT try to light any appliance.
  3.  DO NOT use electrical switches.
  4.  DO NOT use any telephone in

your building.

  5.  Extinguish any open flame.
  6.  Leave the building.
  7.  Immediately call your local gas

supplier after leaving the building.

Follow the gas supplier’s

instructions.

8. If you cannot reach your gas

supplier, call the Fire Department.

Fire Hazard

Keep all flammable objects, liquids and
vapors the minimum required clear-
ances to combustibles away from
heater.

Some objects will catch fire or explode
when placed close to heater.

Failure to follow these instructions can
result in death, injury or property
damage.

WARNING

Installation must be done by a contractor qualified
in the installation and service of gas-fired heating
equipment or your gas supplier.

Improper installation, adjustment, alteration, service
or maintenance can result in death, injury or
property damage. Read the Installation, Operation
and Service Manual thoroughly before installing or
servicing this equipment.

Installer

Please take the time to read and understand

these instructions prior to any installation.

Installer must give a copy of this manual to the owner.

Owner

Keep this manual in a safe place in order to provide

your serviceman with necessary information.

Roberts-Gordon LLC

1250 William Street
P.O. Box 44
Buffalo, New York 14240-0044
Telephone: +1.716.852.4400
Fax: +1.716.852.0854
Toll Free: 800.828.7450

www.rg-inc.com
www.radiantheaters.com

Vantage

Twin Fire

Unitary Infrared Heater

Installation, Operation &

Service Manual

TF-120
TF-160
TF-200
TF-250
TF-300
TF-350
TF-380

P/N 190100NA Rev. H 05/12

Содержание Vantage TF-120









































































Результаты поиска

Содержание Vantage TF-120

Отзывы:

Похожие инструкции для Vantage TF-120

Бренды по названию

Популярные бренды

Roberts Gorden Vantage TF-120, Руководство по обслуживанию

Результаты поиска

Содержание Vantage TF-120

Отзывы:

Похожие инструкции для Vantage TF-120

Бренды по названию

Популярные бренды