EN
EN -1-
1 User’s instructions
GENERAL INSTRUCTIONS
1.
Not for residential use.
2.
These fixtures must only be serviced by a
qualified technician.
3.
In addition to the instructions indicated on this page,
relevant health and safety requirements of the
appropriate EU Directives must be adhered to at all
times.
4.
This fixture is in compliance with section 17 - Lighting
appliance for theatre stages, television, cinema and
photograph studios. Standards NF EN 60598-1 and
NF EN 60598-2-17.
5.
This fixture is rated as IP20, and is for indoor use
only.
FIXTURE
6.
Ensure fixture is correctly mounted on an appropriate
support.
7.
Protection screens must be replaced in the event of
any damage, such as cracks or deep scratches, since
these might reduce performance.
8.
When hung or flown the fixture must be secured by
an additional hanging accessory (such as a safety
cable or bond) of suitable length.
9.
Safety bonds or cables must be securely attached to
the fixture and be as short as possible, or rolled up as
necessary, to minimise travel distance should the
fixture be dislodged.
10. WARNING: LED source become hot during use.
Allow fixture to cool before servicing.
11. Do not tamper with design of fixture nor any of its
safety features.
12. Tighten electrical mains cable connections regularly
and replace with one of identical specification if
damaged.
13. Use only with correct power supply.
14. Do not orientate the fixture towards a source of light
(sun, fixture), in particular for LED versions.
VENTILATION
15. Keep well away from flammable material.
16. Not for outdoor use. Do not cover. Do not permit
fixture to get wet.
17. To avoid overheating, do not obstruct air vents.
PLEASE NOTE
These products have been built to conform to European
standards relating to professional lighting equipment. Any
modification made to our products will void the
manufacturers' warranty.
2 Installation
