3
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Part no. 209-1381 rev. 02/8/21
Uplift Tech Cabinet
Unpack the mirror. Check the box thoroughly for all hardware and loose parts. Carefully inspect the mirror for damage. All wiring should
be done by a qualified licensed electrician. Always keep unit upright, do not lay flat.
WARNING:
To reduce the risk of electrical shock, shut off power before wiring the cabinet.
DANGER:
To reduce the risk of electric shock, always shut off power before cleaning or servicing.
CAUTION:
Requires 120VAC 20Amp circuit.
CAUTION:
This product must be connected to a grounded, metal permanent wiring system or an equipment-
grounding conductor must be run with the circuit conductors and connected to the equipment grounding terminal or lead on the product.
CAUTION:
The cabinet must be wired to a GFI (Ground Fault Interrupter) circuit when used in bathrooms and all
other locations required by the National Electric Code.
CAUTION:
Maximum shelf load 26.625 lbs
WARNING:
Mount the cabinet at the correct height.
WARNING:
Risk of Electric Shock, Fire, and Injury, review the assembly instructions to confirm that the appropriate
critical components and accessories are being used with the cabinet.
Accessories are available for the Uplift Cabinet. Please consult the accessory instruction guide for installation instructions.
Uplift Tech
Uplift Tech with Perimeter Lighting
NOTES
DIMENSIONS
Front View
Front View
Side View
Side View
7-1/8
"
(181 mm)
7-1/8
"
(181 mm)
27
"
(686 mm)
27
"
(686 mm)
24
"
(610 mm)
30
"
(762 mm)
36
"
(914 mm)
48
"
(1219 mm)
30
"
(762 mm)
36
"
(914 mm)
48
"
(1219 mm)
1-1/4
"
(32 mm)
