20
Lamp Off if DMX is missing
This function allows you to switch Off the lamp automatically after 2 minutes if DMX signal is
missing on the data link. Use the [Up] and [Down] buttons to select "On" if you want to switch Off
the lamp or "Off" if you don’t want to switch Off the lamp and press [Enter] to confirm or [Mode]
to cancel and return to the menu.
Switch On/Off the lamp light sensor
Use the [Up] and [Down] buttons to select "On" if you wish to switch the lamp light sensor on and press [Enter]
to confirm or [Mode] to cancel and return to the menu.The option"On" is for the standard operation.Use the
[Up] and [Down] buttons to select "Off" if you wish to switch the lamp light sensor Off and press [Enter] to
confirm or [Mode] to cancel and return to the menu.
Important:
The option"Off" is for "emergency operation" only if the lamp light sensor is defective and
you will wait for a service intervertion! If the lamp light sensor is switched Off,the error messages
"LAEr,SnEr,HEAt" will not appear on the display (only the message "HEAt" will appear if the lamp was turned off
and on within 5 minutes ) and at switching the lamp on the electronics will still try to ignite the lamp until it shines
(even when the lamp is damaged or absent), on this account some electronics parts could be damaged!
Display adjusting
This function allows you to adjust the display settings:
Display intensity
With this function you can adjust the display-intensity from 20% to 100% . Use the [Up] and [Down]
buttons to select the level of the display- intensity and press [Enter] to confirm or [Mode] to cancel
and return to the menu.
Display-reverse
With this function, you can rotate the display by 180°. Use the [Up] and [Down] buttons to select
"normal display" or "display turned by 180°" and press [Enter] to confirm or [Mode] to cancel and
return to the menu.
Display-On
This function allows you to keep the display on or to turn off automatically 2 minutes after last
pressing any button on the control panel. Use the [Up] and [Down] buttons to select "On" if you
wish to keep the display on or "Off" if you wish to turn off automatically 2 minutes after last pressing
any button on the control panel and press [Enter] to confirm or [Mode] to cancel and return to the
menu.
Blackout during movement correction
The function executes the blackout during the head movement correction (the moving head has lost its right pan/
courtesy of
www.sxsevents.co.uk
Phone: 0870 080 2342
email: [email protected]
Event production and Audio-Visual Services
www.sxsevents.co.uk
