Robe RoboSpot Скачать руководство пользователя страница 65

Страница: 65 / 69

controlled by the RoboSpot system.

To update software in the Robospot.

1. Connect a computer running ROBE RDM Uploader to the internet and update software libraries (Libraries

→ Update)

2. Connect the computer and the RoboSpot base station via Ethernet cable. Use the RJ45 socket marked

Camera IN/Update on the RoboSpot base station for this connection.

3. Set computer to address 10.x.x.x/255.0.0.0 (do note the 10.x.x.x). Do not change any IP settings on the

RoboSpot.

4. Use the ROBE Uploader → Devices → Discovery and Devices → Update. This will update RoboSpot together

with the attached FollowSpot Controller panel. The message "Flashing Mode. Please do not touch any buttons!"

will appear on the RoboSpot screen during updating process.

8. Error and information messages

Error message message is signalled by the warning icon in the right top corner of the RoboSpot screen:

Touch the warning icon to display a message. Touch the screen to hide the message.

List of error and information messages:

Display Communication Error.

This message informs you the FollowSpot Controller is not installed in the FollowSpot Controller base or the

connection between the FollowSpot Controller and a computer in the RoboSpot base is faulty.

No actual software in FollowSpot Controller.

Please update to the latest software.

This message informs you the software update of the RoboSpot system should be done.

No actual software in RoboSpot Controller.

Please update to the latest software.

This message informs you the software update of the RoboSpot system should be done.

This picture on the RoboSpot screen informs you that the Raspberry engine inside the RoboSpot does

not have a sufficient voltage on its input (e.g. you have connecred connected a USB flash drive with high power

consumption).

Содержание RoboSpot






































































Результаты поиска

Содержание RoboSpot

Отзывы:

Бренды по названию

Популярные бренды

Robe RoboSpot, Руководство пользователя

Результаты поиска

Содержание RoboSpot

Отзывы:

Бренды по названию

Популярные бренды