Robe RoboSpot Скачать руководство пользователя страница 60

Страница: 60 / 69

Export Show

the menu item allows you to save a show on a USB flash drive connected to the USB port of

the RoboSpot. Supported file systems of the USB flash drive are: FAT16, FAT32, EXT2, EXT3, EXT4.

To export a show.

1. Connect a USB flash drive to the USB port marked USB 50mA.

2. Select desired show (e.g. Show 3) and confirm it.

2. The virtual keyboard will appear on the screen with a name of the show file. You can edit the name of the

show and confirm it by the key ENT. The show file on the USB flash drive will have extension rsl

(e.g. RSShowLibrary-03.rsl).

If the import is successful, the notice: "Export Show OK" will appear for a moment on the screen.

Error and notice messages:

"Export Show Error ID:" - it means that the show library export failed. If ID=-1, it means that show file

cannot be saved on the USB flash drive(e.g. the USB flash drive is set read-only)

"USB flash drive is not present "- it means that the USB flash drive is not connected to the USB port of

the

RoboSpot.

Import Show

the menu item allows you to load a show file saved on a USB flash drive connected to the USB

port of the RoboSpot.

To import a show.

1. Connect a USB flash drive to theUSB port marked USB 50mA.

2. Select a show (e.g. Show 1) to which you want to load a show file from the USB flash drive and confirm it.

Содержание RoboSpot






































































Результаты поиска

Содержание RoboSpot

Отзывы:

Бренды по названию

Популярные бренды

Robe RoboSpot, Руководство пользователя

Результаты поиска

Содержание RoboSpot

Отзывы:

Бренды по названию

Популярные бренды