Robe Robin Tarrantula TW, Руководство пользователя

Страница: 7 / 40

7
4.3 Installing the eggcrate
1. Disconnect the fixture from mains.
2. Screw the eggcrate (1) to the zoom module (3) by means of the three screws (2).
4.4 Uninstalling/Installing the beam shaper
The following instructions applies to the fixture with installed beam shaper only.
1. Disconnect the fixture from mains.
2. Loosen the four screws (2) on the beam shaper (1) and carefully remove it from the head.
3. When you are installing the beam shaper back on the head, the connector on the beam shaper has to
be oriented to the connector (3) in the fixture head.