Robe Robin SuperSpike, Руководство пользователя

Страница: 7 / 47

7
3.2 Replacing gobos
Unplug the fixture from mains before replacing gobos!
1. Disconnect the fixture from mains and allow it to cool for 15 minutes.
2. Remove the plastic cover of the head by loosening the 4 screws on the cover.
3. Unscrew the stop (1) in order to get access to the gobos placed in the gobo module (2).
4 . Gently pull up the gobo holder (3) from the gobo module .
5. Remove the spring lock (6) with an appropriate tool (e.g. small-bladed screwdriver) and remove it.
Do not touch the surface of the pattern of the glass gobo with bare fingers.
5. Remove the original gobo (7) and insert the new one (glossy side towards the light source, black matt side
towards the front lens).
The Robe gobo has a small position point (8) at its edge which has to exactly aim at the position point (9) or
the magnet (10) on the gobo holder (3). Insert the spring lock (6) to secure correct gobo position in the
gobo holder.