Robe ROBIN ParFect 150 FW, Руководство пользователя

Страница: 17 / 36

17
Temp Uni
-
Temperature unit
. Use the menu item to change temperature unit from °C to °F.
I Ef Pos - Init effect positions . Use the menu to set all effects to the desired positions at which they will stay
after switching the fixture on without DMX signal connected.
Defaults - The menu item allows to set all fixture parameters to the default (factory) values.
5.4 Manual Control (Manual)
Use the menu to control all fixture channels by means of the control panel.
5.5 Test program (Test Prg)
Use this menu to to run a special demo-test sequences without an external controller, which will show you some
possibilities of using the ParFect 150.
5.6 Stand-alone (St Alone)
The ParFect 150 offers three user-editable programs (Prog 1-Prog 3), each up to 40 steps. T
Music T - Music trigger . Select this function to enable the sound control of the running program via the built-in
microphone.
Auto Run - Presetting playback . This function allows you to select the program which will be played in
the stand-alone mode after switching the fixture on. Selected program will be played continuously in a loop.
Off - The option disables „Auto Run” function.
Test, Prog 1, Prog 2, Prog 3
- Selected program will start running after switching
the fixture on.
Pr Play - Playing program . Select this menu to run a desired program in a loop (Test Prg, Prog 1-Prog 3).
Select the program you wish to run and press the [ENTER]. The selected program
will start running. By Pressing the [ENTER] again, the program pauses running.
Pr Edit - Editing program . Select this menu to edit or create three editable programs (Prog 1-Prog 3). Each
program step has a step time - during which effects last in the current step and a fade time- during which effects
move to new positions.
To edit program.
1. Press [NEXT] or [PREV] to select the menu "Pr Edit" and press [ENTER].
2. Press [NEXT] or [PREV] to select the desired program and press [ENTER] button.
3. Press [NEXT] or [PREV] to select the desired program step and press [ENTER] button.
4. Press [NEXT] or [PREV] to select the desired item and press [ENTER] button. Now you can edit by [NEXT]
or [PREV] buttons the DMX value (0-255) for selected item:
Prg En. a total number of the program steps (value 1-40). This value you should be set before
starting of programming (e.g. if you want to create program with the 10 steps,
set Prg En=10).
Powr power/special functions
Virt C a virtual colour wheel
Red a red colour coarse
Red F a red colour fine
Green a green colour coarse
Green F a green colour fine
Blue a blue colour coarse
Blue F a blue colour fine
White a white colour
White F a white colour fine
CTC a colour temperature correction
C Mix C a colour mix control
Zoom a zoom function
Zoom F a zoom function fine
Stro a strobe/shutter function