manualshive.com logo in svg

Robe Robin MMX Blade, Руководство пользователя, Страница: 6 / 47

Поделиться
Скачать
Robe Robin MMX Blade Скачать руководство пользователя страница 6

6

4. Installation

               Fixtures must be installed by a Qualified electrician in accordance with all    

national  and local electrical and construction codes and regulatio

n.

4.1 Connection to the mains

For protection from electric shock, the fixture must be earthed!

The Robin MMX Blade is equipped with auto-switching power supply that automatically adjusts to any 50/60Hz 

AC power source from 00-40 Volts.

For use with 100-120 V supplies, the main 8 A fuse has to be exchanged for 15 A fuse which is enclosed 

in the packing.

To install the 15 A fuse:

1. Disconnect the fixture from AC power.

2. Unscrew the fuse holder on the rear panel of the base with a flat-tip screwdriver from the housing  

(anticlockwise).

3. Remove the 8 A fuse from the fuse holder.

4. Put the 5 A fuse in the fuse holder.

5. Replace the fuse holder in the housing and screw it fully clockwise.

Install a suitable plug on the power cord (if it is needed), note that the cores in the power cord are coloured 

according to the following table. The earth has to be connected!

If you have any doubts about proper installation, consult a qualified electrician.

 

            Core (EU) 

  Core (US) 

    Connection   Plug Terminal Marking 

Brown   

     Black 

    Live      

             L

Light blue 

     White 

    Neutral 

 

N

Yellow/Green       Green 

    Earth

 

 

Содержание Robin MMX Blade
















































Отзывы:

Нет отзывов