Robe Robin MMX Blade, Руководство пользователя, Страница: 29 / 47

9
8. RDM
This fixture supports RDM operation. RDM (Remote Device Management) is a bi-directional communications
protocol for use in DMX5 control systems, it is the new open standard for DMX512 device configuration and
status monitoring.
The RDM protocol allows data packets to be inserted into a DMX5 data stream without adversely affecting
existing non-RDM equipment. By using a special „Start Code,“ and by complying with the timing specifications
for DMX5, the RDM protocol allows a console or dedicated RDM controller to send commands to and receive
messages from specific moving lights.
RDM allows explicit commands to be sent to a device and responses to be received from it.
The list of commands for Robin MMX Blade is the following.
Parameter ID Discovery command SET command GET command
DISC_UNIQUE_BRANCH *
DISC_MUTE
*
DISC_UN_MUTE *
DEVICE_INFO *
SUPPORTED_PARAMETERS
*
SOFTWARE_VERSION_LABEL *
DMX_START_ADDRESS
* *
IDENTIFY_DEVICE * *
DEVICE_MODEL_DESCRIPTION
*
MANUFACTURER_LABEL *
DEVICE_LABEL * *
SENSOR_DEFINITION
*
SENSOR_VALUE *
DISPLAY_INVERT
* *
DISPLAY_LEVEL * *
PAN_INVERT
* *
TILT_INVERT * *
DEVICE_RESET
*
DMX_PERSONALITY * *
DMX_PERSONALITY_DESCRIPTION *
STATUS_MESSAGES
*
STATUS_ID_DESCRIPTION *
LAMP_STATE
* *
LAMP_ON_MODE
1
* *
DEVICE_HOURS 2
*
LAMP_HOURS
2
*
LAMP_STRIKES 2 *
1 ...Another options for this command (only for Robe´s fixtures):
value PARAMETER_DATA=0x84 - lamp OFF by DMX value on DMX channel
value PARAMETER_DATA=0x88 - lamp OFF if DMX is not present
2
...Commands relative resetable values
9. Wireless DMX operation
The wireless version of the Robin MMX Blade is equipped with the Lumen Radio CRMX module and antenna
for receiving DMX signal. CRMX module operates on the .4 GHz band.
The item " Wireless " from the menu "DMX Input" allows you to activate receiving of wireless DMX (Personal-
ity--> DMX Input -->Wireless.). First two options from the "DMX Input" menu are stated in DMX chart as well
(channel Power/Special functions , range of 0-9 DMX). If DMX input option is changed by DMX command,
the change is permanently written into fixture´s memory.