Robe Robin DLX SPOT, Руководство пользователя

Страница: 14 / 49

4
5. Remotely controllable functions
Virtual colour wheel
This wheel contains 236 colours including whites (2700K, 3200K, 4200K, 5600K and 8000K). Tungsten lamp
effect at whites 2700K and 3200K.
RGBW or CMY colour mixing system
The RGBW colour mixing system is based on red, green, blue and white high power LEDs. Option for switching
the fixture to the CMY colour mixing system is also available.
Static gobo wheel
The static gobo wheel includes 8 replaceable „SLOT&LOCK” metal gobos and one glass gobo. Gobo position -
ing and continual gobo positioning is available as well as a gobo-shake function.
Rotating gobo wheel
The rotating gobo wheel includes 7 gobos rotating in both directions, indexable, replaceable "SLOT&LOCK”
glass gobos + open position. Gobo positioning and gobo selection speed is available as well as a gobo-shake
function.
Rotating gobo wheels
The fixture includes 2 rotating gobo wheels. Each rotating gobo wheel includes 7 gobos rotating in both direc -
tions, indexable, replaceable "SLOT&LOCK” glass gobos + open position. Gobo positioning and gobo selection
speed is available as well as a gobo-shake function.
Prism
The 3-facet prism rotates in both directions at different speeds, 16 prism/gobo macros are available.
Frost
Frost module provides variable frost for fine frosting.
Iris
Motorized adjustable iris, wide range of variable pulse effects.
Zoom
Motorized zoom unit enables zoom between 10 °- 45°.
Focus/Autofocus
Motorized focus allowes to focus beam from approx. 2 meters to infinity.
Special function autofocus allows to keep focused image during zooming . Select desired distance and effect on
which you need to focus at channel "Autofocus (priority & distance selection)" and use standard "Focus" channel
to focus the image. The correct value at "Autofocus (priority & distance selection)" channel can be typically in
tolerance of + 2 DMX -2DMX . You should try to set value , set focus and check min/max. zoom.
Note: If you use the Autofocus function in the program steps (scenes), there is important to switch off Autofocus
before using it in the sequence of program steps.
Step(Scene) Zoom Focus Autofocus
1
55 87
0
(hole)
2 255 181 8 (hole)
3 0 181 8 (hole)
4 0 165 136 (rot. gobo)
5 255 165 139 (rot. gobo)
If you want to in the step 6 repeat the Autofocus scenes 2-5, you have to go to step 1, after that to the step
2,3...5 If you will go to directly to the step 2, after that to the step 3.... the Autofocus will not work properly be -
cause the initial position of the focus module will not be the same as it was in the step 1.
Pan & Tilt
Pan/Tilt movement ranges 0-540°/0-280°.
Dimmer/Shutter unit
Smooth 0 - 100 % dimming is provided by the electronic control unit. This unit is also used for strobe effects
with variable speed.