Robe Robin CycFX 8 wireless DMX CRMX, Руководство пользователя

Страница: 19 / 29

Robin CycFX 8
19
Sw Ver - Software versions . Select this item to read the software version of the fixture modules.
IC-1 - A zoom processor.
IC-2 - A display processor.
IC-3 - LED driver processor.
IC-4 - LED control processor
6.3 Personality (Pers)
DMX Pres - DMX preset . Use the menu to select desired channel mode.
Mode 1 - 14 control channels
Mode 2 - 21 control channels
Mode 3 - 45 control channels
Mode 4 - 53 control channels
DMX In
- DMX input .
Use the menu to select mode of receiving DMX signal.
Wired -
DMX signal is received by means of the standard DMX cable.
Wireless - DMX signal is received by means of the inbuilt wireless module.
Tilt Rev - Tilt reverse . The item allows to invert tilt movement of the LED head.
T Feed
-
Tilt Feedback
. The menu item allows to return the mowing head to the required tilt position after
changing the position by an external force if this option is set on.
Note. The Tilt Feedback should be permanent On, the option Off is not suitable for standard operation and the
head of the fixture can be damaged!
BLC DMC - Blackout during movement correction . Set this option on if you wish to close light
output during the time when the head goes to its correct position, which has been changed by an
external force.
Act Blc - Active blackout . Use this menu if you wish to close the light output during effect changes.
P/T Mov - The menu item allows to close light output while the tilt coordinates
are changing.
Display - Display adjusting . This menu allows you to adjust the display behaviour.
Turn - This function turns the display by 180°.
On/Off T - This function allows you to keep the display permanent on or turn it off two
minutes after last pressing any button on the control panel.
Contrast - Use this function to adjust contrast of the display (0-100%).
Backlight
- Use this function to adjust backlight of the display (0-100%).
C Cal M
-
Colour calibration mode
. If the functin is on, the white output (2700K-8000K) from the fixture (and also
mixed colours) is more uniform. Each colour is dynamically corrected according to the value set in the menu
"Calibrate Effects" (Special-> Adjust-> Calib).
C Mix M - Colour mixing mode . This item allows switching into RGBW or CMY mode. In the CMY mode, the
white(8bit)/white (16) bit channels are not active.
Whi Cnt – White counting . If this function is On, the white LED of each pixel lights when a white colour is mixed.
The light intensity of the white LED is in a proportion to the intensity of the rest of pixel´s LEDs (red, Green, blue)
and improves the white output of the pixel. The function influences “pixel modes” only - DMX mode 3 and 4 (and
RGBW colour mixing mode has to be set).
Sil Zom – Silent zoom . If this function is on, a speed of the zoom movement is redused and at the same time